Home » products » Weighing Inst. » New Products » MCT 1302
Weighing Inst.
New Products
Power supply: | 5 Vdc (max 8 -350 Ohm- load cells) |
Measuring range: | -3.9 ÷ +3.9 mV/V |
Input sensitivity: | 0.02 microV min |
Linearity: | < 0.01% FS |
Temperature drift: | < 0.001% FS/ °C |
Display: | graphic LCD (240x128 pixel) |
A/D converter: | 24 bit; internal resolution up to 16.000.000 |
Frequency signal acquisition: | 12 ÷ 1000 Hz |
Displayable resolution: | 999.999 displayable divisions on net weight |
Value divisions (selectable): | x1, x2, x5, x10, x20, x50; 4 decimal point |
Filter: | selectable 0.1÷250 Hz |
Keyboard: | 4 wires resistive touch screen |
Power supply: | 10-30 Vdc - Power consumption 5 W |
Operating temperature: | -10/+ 50°C (humidity max 85% no condensation) |
Storage temperature: | -20 ±+70°C |
Logic outputs: | 6 opto-isolated; max 24 Vdc/100mA each |
Logic inputs: | 6 optically isolated 24 Vdc PNP (external power supply) |
Additional I/O: | up to 4 external modules with 4 in/8-out each (16 in/32 out, total) by independent RS485 |
Serial ports: | 1 USB device + 1 RS232C + 1 RS485/Fieldbus |
Optional analogue output: | optoisolated 16-Bit Voltage: 0 to 5/10 V (R min10 K Ohm), Current: 0/4 to 20 mA (R max 300 Ohm) |
Analog output calibration: | keyboard (touch screen) |
Analog output linearity: | < 0,02% FS |
Temperature drift analog output: | 0,001% FS/°C |
Microcontroller: | ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB |
Data storage: | 64 Kbytes expandable up to 1024 Kbytes |
Regulatory Compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology |
Electrical connections: | removable screw terminal blocks (3.81mm pitch) |
Dimensions: | 150x95x26mm (LxWxH) including terminal blocks; 150x95x56mm (WxHxD) with fieldbus options; drilling template: 138x82mm |
Mounting type: | panel mount |
Communication protocols: | ETHERNET 10/100 con protocolli TCP, MODUBUS/TCP, UDP, IP, ICMP, ARP; PROFINET; ETHERNET/IP; ETHERCAT |