Home » products » Weighing Inst. » New Products » DAT 1400 ETHERNET IP
Weighing Inst.
New Products
Power supply: | 5 Vdc (max 8 -350 Ohm- load cells) |
Measuring range: | -3.9 ÷ +3.9 mV/V |
Input sensitivity: | 0.02 micronV min |
Linearity: | < 0.01% FS |
Temperature drift: | < 0.001% FS/ °C |
Display: | 6 digit, 7-segment LED red, height 14mm |
A/D converter: | 24 bit |
Internal resolution: | > di 16.000.000 points |
Frequency signal acquisition: | 12 ÷ 1000 Hz |
Displayable resolution: | 999.999 displayable divisions on net weight |
Value divisions (selectable): | x1, x2, x5, x10, x20, x50 |
Decimals setting: | 0.0 ; 0.00 ; 0.000; 0.0000 |
Filter: | Selectable 0.5 to 1000 Hz |
Keybord: | capacitive, 4 keys |
Instrument power supply: | 12-24 Vdc ± 15% - Power consumption 5 W |
Operating temperature: | -10/+ 50 ° C (humidity max 85% no condensation) |
Storage temperature: | -20/+70°C |
Logic outputs: | 2 opto-isolated; MAX 24 Vdc/100 mA each |
Logic inputs: | 2 opto-isolated 24 Vdc PNP (external power supply) |
Serial ports: | 1 USB device + 1 RS232C + 1 RS485/Fieldbus |
Peak Hold function: | for dynamic measurements |
Optional analogue output: | optoisolated 16-Bit Voltage: 0 to 5/10 V (R min10 K Ohm), Current: 0/4 to 20 mA (R max 300 Ohm) |
Analog output linearity: | < 0,02% FS |
Temperature drift analog output: | 0,001% FS / °C |
Microcontroller: | ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB |
Data storage: | 64 Kbytes expandable up to 1024 Kbytes |
Regulatory Compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety |
Electrical connections: | 5 mm terminal blocks, removable |