ALPHA

39/2014

Load Cells Bending beam

Load Cells

Bending beam

Request Manual

A PHP Error was encountered

Severity: Warning

Message: Undefined property: stdClass::$SchedaTecnica

Filename: views/dettaglio_prodotto.php

Line Number: 59

TECHNICAL CHARACTERISTICS ALPHA

Rated load (R.L.):	25, 50, 100, 150, 250, 500 N
Combined error:	< ±0.02% of R.O.
Repeatability:	< ±0.01% of R.O.
Creep (20 minutes):	±0.05% of R.L.
Safe overload:	175% of R.L.
Ultimate overload:	300% of R.L.
Recommended input:	5÷12 Vdc/Vac
Maximum excitation:	20 Vdc/Vac
Input resistance:	350 ± 3.5 Ohm
Output resistance:	350 ± 3.5 Ohm
Insulation resistance:	2000 M Ohm
Rated output (R.O.):	3.0 mV/V
Zero balance:	< ±2% of R.O.
Temperature range:	-25 ÷ +80 °C
Compensated temperature range:	-15 ÷ +65 °C
Temperature effect on zero balance:	< ±0.0014% of R.O./°C
Temperature effect on output:	< ±0.0014% on output/°C
Max load deflection:	0.254 mm capacity 25÷250 N; 0.432 mm capacity 500 N
Degree of protection:	IP67
Material:	copper and tin-plated brass
Electrical connection:	4 conductors shielded cable; length 1.5 m
Certifications:	OIML EN 45501: 1992 (25÷250 N), CSA C22.2, FM3611

Accessories are not to be considered included in the price of each product.
All the above is purely illustrative and not to be understood demanding towardsPrecise Instrument Corporation