Home » products » Weighing Inst. » Weight Transmitters » DAT 400 PBS
Weighing Inst.
Weight Transmitters
Trasducer input voltage: | 5 V (max 6 load cells 350 Ohm) |
Measuring range: | -0.5÷+3..5 mV/V (-3.9÷+3.9 mV/V optional) |
Input sensitivity: | 0.02 µV/ per count |
Linearity: | <0.001% full scale/ °C |
Gain drift: | <0.001% full scale/ °C |
Display: | 6 digit, red LED (7 segments), h 14 mm |
A/D Converter: | 24 bit |
Resolution: | > 16.000.000 counts |
Visible resolution: | 60.000 divisions displayable on net weight |
Set decimal: | 0,0; 0,00; 0,000 |
Filter: | 0.1 ÷ 25 Hz adjustable |
Keyboard: | 4 tactile feedback buttons |
Tool voltage: | 18 ÷ 28 Vcc - power 5 W |
Temperature range: | -10 ÷ +50°C |
Storage temperature: | -20 ÷ +70°C |
Logic output: | 2 Solid-state relays, (maximum load 24 Vdc / 100 mA each) |
Logic input: | 2 optoisolated 24 V c.c. PNP (External voltage) |
Serial door: | USB, RS232C or RS422/RS485 with ASCII or Modbus RTU protocols |
Transmission distance: | 15m (RS232C), 1000m (RS422 e RS485) |
FIELDBUS protocol: | PROFIBUS, DEVICENET, ETHERNET, PROFINET (opzional) |
Others fieldbus comunication: | CANopen, Modbus-Plus and other; Precise Gateway 3000 (opzional) |
Peak Hold function: | for dynamic measures |
Baud rate: | 2400, 9600, 19200, 38400, 115200 adjustable |
Analogic optional output: | optoisolated 16 Bit Tension: 0÷5/10V (R min10 K Ohm) Current: 0/4÷20mA (R max 300 Ohm) |
Regulatory compliance: | EN50081-1, EN50082-2 for EMC; EN61010-1 for Electrical security |
Electrical connection: | Terminal screw pass 5 mm and 4 cable glands PG9 |
Dimensions and weight: | 215x210x105 (PBS) (LxHxD) |
Distance between the fixing holes (4): | 157x127 (PBS) (LxH) |