Home » products » Weighing Inst. » Weight Indicators » MC 102
Weighing Inst.
Weight Indicators
Trasducer input voltage: | 5 Vdc 120 mA (max 8 cells 350 Ohm in parallel) |
Measuring range: | -3.9 ÷ +3.9 mV/V |
Input sensitivity: | 0.02 µV/ per count |
Linearity: | <0.01% of full scale |
Gain drift: | <0.0003% full scale/ °C |
A/D Converter: | 24 bit |
Internal resolution: | > 16.000.000 counts |
Visible resolution: | 99.999 division visible on net weight |
Set decimal: | 0.0 ; 0.00 ; 0.000; 0.0000 |
Filter: | 0.2 ÷ 25 Hz adjustable |
Tool voltage: | 230 Vac ±10% - 50/60 Hz absorbed power 7 W (115 Vac on demand) |
Temperature range: | -10 ÷ +50°C |
Storage temperature: | -20 ÷ +70°C |
Logic output: | 4 relays (NA) Max. 115 Vac/30 Vdc 0.5 A each |
Logic input: | 3 optoisolated 12 Vdc/24 Vdc PNP |
Serial door: | COM1: RS232 half duplex COM2: RS422/RS485 half duplex |
Transmission distance: | 15m (RS232C), 1000m (RS422 e RS485) |
Protocol: | ASCII, Modbus, Printers Custom P190 o FT190, EPSON |
Baud rate: | 300 ÷ 115200 (adjustable) |
Regulatory compliance: | EN61000-6-3, EN1000-6-2, EN61010-1 |
Insulation: | Class II |
Dimensions: | 144 x 72 x 120 mm (W x H x D) |
Drilling template: | 139 x 67 mm (W x H) |
Electrical connection: | Terminal screw pass 5.08 mm |
Optional dosage software: | 1 component in the loading or unloading up to 50 programmable recipes |
Optional analog output: | Optically isolated 16-Bit Voltage: 0÷5 or 0÷10V (R>10K Ohms); Current: 0÷20 o 4÷20mA (R < 300 Ohm); Linearity: 0.03% F.S. |
BCD optional output: | Throught external module |
Profibus optional: | Throught external module |
Power supply: | 12 Vdc; Analog output voltage available is 0÷5 V; Analog output current with R <260 Ohm; 24 VDC |